Milling is used to create the Matting tactile guidance system Brass. Elements are installed with specific spacing to guide the visually impaired. Installation is performed by drilling into the substrate, three holes per element and one hole per rivet. A template is used for hole placement. Fasteners are secured using the recommended adhesive, which is applied in the drilled holes. If you do not want to drill into the substrate, elements and rivets without fasteners are also available for bonding or applying tape.
Please contact us if you would like a special version, or if you need any help with installation.
|Dimensions (+/- 1mm)||LINE||SMOOTH|
|Material||Brass.||NCS 0,47||NCS 0,51|
|Element||280 x 35 x 5 mm||362415||362405|
|Element without fastener||362416||362406|
|Element with tape||362417||362407|
|Element without fastener||280 x 35 x 3 mm||362424UF|
|Rivet||Ø35 x 5 mm||362410||362401|
|Rivet without fastener||362409||362400|
|Rivet with tape||362408||362399|
|Rivet with tape||Ø50 x 1,5 mm||362420|
|Element, 5 lines with tape||280 x 35 x 3 mm||362423|
|Element with nail plug||270 x 30 x 5 mm||362490|
|Element without fastener||400 x 35 x 5 mm||362500|
|Element without fastener||400 x 35 x 2,7 mm||362505|
|Element arched, special fastener||280 x 35 x 5 mm||362593|
Use our contact form if you wish to order a sample.